Kegco 15" Wide Outdoor Stainless Steel Built-In Right Hinge Kegerator
urbanmancaves.com
DESCRIPTION
- Features a convenient 15" wide undercounter design that makes it the perfect built-in outdoor kegerator
- Compact design that is capable of accommodating 7.75 gallon quarter slim kegs as well as 5 gallon sankey or homebrew kegs
- Kegerator comes complete with a single tap draft dispense system with 100% stainless contact components
- Utilizes forced air refrigeration all the way up to the tower to ensure that every drop is served ice cold
- Dimensions: 15" W x 34" H x 23 5/8" D (25 1/2" w/ handle)
FEATURES
-
Includes 5 lb. Aluminum CO2 Tank
This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved, and have a male thread for CO2 regulators. An average fill is good for 5-6 kegs depending upon your fill. -
Includes Commercial Grade Dual Gauge CO2 Regulator
The regulator works with any CO2 tank with a CGA-320 valve and measures PSI, as well as the volume of the CO2 gas in the cylinder. It has a pressure release valve and a large hand control which makes it easy to adjust the pressure inside the keg. -
Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Clamps
This standard length 5 foot 5/16" I.D. blue air/CO2 tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. The air line assembly comes with two plastic snap clamps with a reusable clamp design. -
Includes D system lever handle keg coupler that can tap all domestic kegs
This commercial grade lever handle keg coupler works with all American "D" system Sankey kegs. It features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg, simply pull out and then down on the lever handle. -
Includes a Kegco Exclusive 14" Tall, 3" Diameter Polished Stainless Steel Draft Tower
This NSF-approved tower is a 3" diameter single faucet metal draft tower made of polished stainless steel and includes 5 feet of 3/16" I.D. clear beer tubing. The faucet, shank, and fittings are all made of 304 grade stainless steel for the ultimate in sanitation. The tower is mounted using the gasket and four screws that are included. This Kegco Exclusive tower measures 14" tall, giving you an extra 2" of space over standard draft beer towers. - All stainless steel construction makes this kegerator durable enough for outdoor use
- Digital temperature control keeps temperature in range of 32°F-64°F
- Maximum Ambient Temperature: 90 degrees Fahrenheit
- Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
- Fan-forced cooling provides even temperatures throughout the cabinet and helps with quick temperature pulldown on a warm keg
- Blower hose direct cold air into the draft beer tower so every drop is kept cool
- Tower extension is provided to bridge the gap between the top of the kegerator and the bottom of the countertop in undercounter applications
- 8 Color LED interior lighting
- Security lock
- Includes Towel Bar for a professional, sleek, modern aesthetic
- Removable stainless steel interior floor plate for long lasting durability and easy glide of beer keg
- A perfect option for dispensing beer, soda, kombucha or wine
- 25% more energy efficient design saves you money each month!
- Plugs into standard home outlet
This kegerator can fit one quarter slim (7.75 gal) keg, or one 5 gallon commercial or homebrew keg.
SPECS
| Dimensions | |
|---|---|
| Height | 34" |
| Width | 15" |
| Depth | 23 5/8" (25 1/2" w/ handle) |
| Capacity | 37 1/2" |
| Weight | |
|---|---|
| Unit Weight | 70.55 lbs. |
| Warranty | |
|---|---|
| Labor | 1 Year |
| Parts | 1 Year |
| Compressor (Parts Only) | 5 Years |
| Exterior | |
|---|---|
| Cabinet | Stainless Steel |
| Drip Tray | No |
| Guard Rail | No |
| Casters | Yes |
| Keg Storage Capacities | |
|---|---|
| 1/4-Barrel Slim | 1 |
| 1/6-Barrel | 1 |
| 5 gal. Ball/Pin Lock Keg | 1 |
| Key Features | |
|---|---|
| Built-in Capable | Yes |
| Door Swing | Right Hinge |
| Keg Coupler | Yes |
| Security Lock | Yes |
| Regulator | Yes |
| CO2 Tank | Yes |
| Cleaning Kit | Optional Add-On |
| Outdoor Use | Yes |
| Commercial Use | Yes |
| Interior Light | Colored LED |
| Wheel Qty | 4 |
| Door | |
|---|---|
| Color / Material | Stainless Steel |
| Number of Doors | 1 |
| Door Handle | Towel Bar |
| Field Reversible | No |
| Accepts Custom Overlay Panel | No |
| Draft Beer Tower | |
|---|---|
| Number of Faucets | 1 |
| Material | Stainless Steel |
| Height | 14" |
| Diameter | 3" |
| Cooling System | |
|---|---|
| Type | Compressor |
| Defrost System | Auto |
| Front Ventilation | Yes |
| Refrigerant | R600a |
| Temperature Range | 32° - 64°F |
| Controls | |
|---|---|
| Adjustable Thermostat | Yes |
| Digital | Yes |
| Electrical | |
|---|---|
| Running Amps | 0.9A |
| Voltage/Frequency | 115v / 60Hz |
WARRANTY
Labor - 12 Months
LIMITED ONE YEAR WARRANTY
For one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual. Kegco will provide you with a reasonably similar replacement product that is either new or factory refurbished.
Parts - 60 Months
LIMITED SECOND THROUGH FIFTH YEAR WARRANTY:
For the second through the fifth year from date of original purchase, Kegco Products will provide a replacement compressor free of charge due to a failure. You are responsible for the service labor and freight charges.
Additional Details
WHAT IS NOT COVERED:
- Content losses of food or other, due to spoilage.
- Incidental or consequential damages.
- Parts and labor costs for the following will not be considered as warranty:
- Door springs, and/or frames.
- Inner door panels, door rails and/or door supports.
- Light bulbs and/or plastic housing.
- Plastic cabinet liners.
- Punctured evaporator that voids the warranty on the complete sealed system.
- Repairs performed by unauthorized servicers.
- Shipping and handling costs associated with the replacement of the unit.
- Service calls that do not involve defects in material or workmanship such as customer education, door reversal, or proper installation.
- Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service call to remote areas, including the State of Alaska.
- Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or acts of God.
- Replacement of house fuses or resetting circuit breakers.
- Failure of the product if it is used for other than its intended purpose.
- This warranty does not apply outside the Continental USA.
Order Confirmation
Once you place an order, you will receive an order confirmation email. This confirms that we have received your order in our system and that your payment method has been pre-authorized. We begin processing all orders immediately. Most orders ship within 1–3 business days, and transit times are typically 7–10 business days.
Order Shipment
Tracking information will be sent to the email address you provided at checkout within 24 hours after your order leaves the warehouse. If you do not receive tracking details within 3 business days, please contact us at support@urbanmancaves.com or call 904-375-7471.
Shipping Restrictions
We currently do not ship outside the United States. If this changes, updates will be provided here.
Shipping Options
Curbside Delivery – (Free or Cost)
Delivered to the end of your driveway or curb. Typical delivery time is 7–10 business days after processing.
Threshold Delivery – (Optional Upgrade)
Item is delivered to your porch, sheltered entryway, or garage area. Available for select items. Contact us for availability and pricing.
White Glove Delivery – (Optional Upgrade)
Delivery to your room of choice. Full assembly is NOT included for some items. All packaging and debris will be removed from your home. Availability varies by item—please contact us to confirm eligibility before ordering.
Terms of Use
By using this site, you agree to these Terms of Use. If you do not agree, please discontinue use of the site
RETURN & REFUND POLICY
Last Updated: November 29, 2025
Thank you for shopping with Urban Man Caves. Please review our Return & Refund Policy carefully, as many of our products are large, heavy, and shipped directly from the manufacturer. By placing an order, you agree to the terms below.
-
ORDER CANCELLATIONS
Orders may be canceled within 24 hours of purchase for a full refund if the item has not yet shipped. If the order has already shipped, it will be treated as a return and subject to return shipping and restocking fees. -
RETURNS
Most items may be returned within 30 days of delivery if they are unused, in original condition, and in the original packaging.
To request a return, contact us at support@urbanmancaves.com or call 904-375-7471.
All returns require prior approval. Returns cannot be sent to our business office and must be shipped to the manufacturer or authorized warehouse. -
RETURN SHIPPING FEES
Unless the item arrives damaged or incorrect, customers are responsible for:
-
Return shipping costs
-
Original shipping costs (including items marked “free shipping”)
-
Manufacturer restocking fees (typically 15%–30%, depending on brand)
These fees will be deducted from the refund amount.
-
NON-RETURNABLE ITEMS
The following items cannot be returned:
-
Used, installed, or assembled items
-
Custom-made or special-order products
-
Clearance, final-sale, or closeout items
-
Items without original packaging
-
Products marked “non-returnable”
-
Items not approved for return by Urban Man Caves or the manufacturer
If you are unsure whether your item is returnable, contact us before purchasing.
-
DAMAGED OR DEFECTIVE ITEMS
If your item arrives damaged or defective, you must report it within 48 hours of delivery. To process a damage claim, provide:
-
Photos of the damage
-
Photos of the packaging
-
A description of the issue
-
Your order number
Send to: support@urbanmancaves.com
Manufacturers require this documentation. Failure to report damage within 48 hours may result in the claim being denied.
-
WRONG ITEM RECEIVED
If you receive an incorrect item, notify us within 48 hours of delivery. We will arrange for the correct item to be shipped and provide return instructions for the incorrect item at no cost to you. -
REFUND PROCESSING
Refunds are issued after the manufacturer receives and inspects the returned item.
Refunds typically take 5–10 business days to appear in your account.
Any shipping or restocking fees will be deducted from the final refund.
We will notify you once your refund is processed. -
EXCHANGES
Exchanges may be offered for eligible items. Customers are responsible for return shipping, any price difference, and any applicable restocking fees. Replacement items will ship after the original item is received and inspected. -
FREIGHT DELIVERY (LTL SHIPMENTS)
Many of our products ship via freight carriers. Customers are responsible for inspecting the shipment before signing for delivery.
If damage is visible or suspected, you must note it on the delivery receipt or refuse the shipment.
Signing without noting damage may void your ability to file a claim. -
CONTACT INFORMATION
For returns, refunds, or assistance, contact us:
Email: support@urbanmancaves.com
Phone: 904-375-7471
The Urban Standard
Our collections represent a curated blend of the world's finest materials, selected to provide a tactile reality of luxury. From the kiln-dried resilience of sustainable Grade-A Teak to the sophisticated touch of hand-sewn leathers and Carrara marble, we source only the benchmark of excellence. Whether featuring hand-forged pewter accents or bespoke velvet upholstery, every piece in our sanctuary is chosen for its enduring quality and distinguished character.
