POST TEMPEST IN GROUND 3" X99

The Tempest in‑ground post delivers exact seven‑foot visible fence heights while eliminating field cutting and external mounting brackets.

Direct Burial Geometry

Designed for immediate placement in excavated soil or concrete, this unit measures exactly 99 inches overall with a uniform three‑inch cross‑section. Embedding the base precisely 24 inches below grade leaves an unobstructed seven‑foot clearance above the surface. The calculated length maintains consistent elevation across continuous boundaries, eliminating grade‑adjustment brackets or stepped mounting plates.

Structural Alignment and Load Transfer

The straight shaft channels lateral tension directly into the surrounding medium, stabilizing heavy gates, taut wire fencing, and solid panels. Because the outer diameter matches standard earth augers, installer clearance remains predictable without soil displacement issues. Pre‑milled proportions align directly with common fence rails, metal splice connectors, and single‑post gate hinges, removing intermediate adapter pieces.

Site Layout and Spacing

• Standard interval: Space units at six‑foot centers to neutralize directional pull and prevent mid‑span deflection.
• Framework calculation: Measure total boundary footage, divide by six, and reserve additional posts for corner assemblies, gate replacements, and terminal braces before addressing interior runs.

Adjust embedment depth according to regional frost requirements and ground moisture. Ready‑to‑install dimensions streamline the initial framing phase, converting rough site markings directly into a level, load‑bearing enclosure.

POST TEMPEST IN GROUND 3" X99